modscode / Gallery / your-turn
your-turn
把最後一則回覆裡要你親手跑的指令(程式碼區塊裡 sudo 開頭的行、! <cmd>、前一句叫你自己跑的 shell 區塊)列成對話旁的清單,每段帶上回覆裡的前一句說明;按數字鍵勾完成、按 y 再按編號複製指令,全部完成後按 r 回報,送出「N/N 完成了」。只整理,不代跑
What it does
- Draws a pane, toasts
- Adds /your-turn
- Hooks session.start, turn.complete
Good points
- No network calls
- Starts no processes
- Small: 337 lines
- Written in TypeScript
Code to start from
Two kinds: a starter modscode writes from the design above, and the lines of the mod's own code that draw it.
Starter (register.tsx)
import type { Register } from 'claude-code'
// Drawn like your-turn by Mango (pane, toast), as modscode read it from the mod's code:
// https://modscode.com/gallery/mangow314-your-turn/
// Written by modscode from that reading, not copied from the mod: use it as you like.
// Each value below stands for one the mod works out at run time; put in your own.
export const register: Register = on => {
// the pane: open it with $.ui.open({ id: 'my-pane', title: "要你跑的指令" })
on('ui.render', { component: 'Pane', requestId: 'my-pane' }, async ($, e) => {
const { Box, Text, Button } = $.ui.resolve(e)
const title = '…'
const body = '…'
const i = '…'
const label = '…'
const body2 = '…'
const body3 = '…'
const body4 = '…'
const body5 = '…'
const body6 = '…'
const title2 = '…'
const body7 = '…'
const body8 = '…'
const body9 = '…'
const body10 = '…'
const body11 = '…'
const body12 = '…'
const title3 = '…'
const body13 = '…'
const body14 = '…'
const body15 = '…'
const body16 = '…'
const body17 = '…'
const body18 = '…'
const done = '…'
const length = '…'
const keys = '…'
return (
<Box flexDirection="column">
<Text>
<Text bold>
your-turn
</Text>
<Text color="#928374">
{" 沒有要你跑的指令"}
</Text>
</Text>
<Box flexDirection="column" marginTop={1}>
<Text>
<Text>
╭─
</Text>
<Text bold>
{title}
</Text>
<Text>
────────╮
</Text>
</Text>
<Box flexDirection="row">
<Text>
{"│ "}
</Text>
<Text color="#928374">
{body}
</Text>
<Text>
{" │"}
</Text>
</Box>
<Box flexDirection="row">
<Text>
{"│ "}
</Text>
<Button plain hotkey={`${i}`} label={`${label}`} />
<Text bold>
{" ! "}
</Text>
<Text>
{body2}
</Text>
<Text>
{" │"}
</Text>
</Box>
<Box flexDirection="row">
<Text>
{"│ "}
</Text>
<Text color="#928374">
{body3}
</Text>
<Text>
{" │"}
</Text>
</Box>
<Box flexDirection="row">
<Text>
{"│ "}
</Text>
<Button plain hotkey={`${i}`} label={`${label}`} />
<Text bold>
{" ! "}
</Text>
<Text>
{body4}
</Text>
<Text>
{" │"}
</Text>
</Box>
<Box flexDirection="row">
<Text>
{"│ "}
</Text>
<Text color="#928374">
{body5}
</Text>
<Text>
{" │"}
</Text>
</Box>
<Box flexDirection="row">
<Text>
{"│ "}
</Text>
<Button plain hotkey={`${i}`} label={`${label}`} />
<Text bold>
{" ! "}
</Text>
<Text>
{body6}
</Text>
<Text>
{" │"}
</Text>
</Box>
<Text>
╰────────╯
</Text>
</Box>
<Box flexDirection="column" marginTop={1}>
<Text>
<Text>
╭─
</Text>
<Text bold>
{title2}
</Text>
<Text>
────────╮
</Text>
</Text>
<Box flexDirection="row">
<Text>
{"│ "}
</Text>
<Text color="#928374">
{body7}
</Text>
<Text>
{" │"}
</Text>
</Box>
<Box flexDirection="row">
<Text>
{"│ "}
</Text>
<Button plain hotkey={`${i}`} label={`${label}`} />
<Text bold>
{" ! "}
</Text>
<Text>
{body8}
</Text>
<Text>
{" │"}
</Text>
</Box>
<Box flexDirection="row">
<Text>
{"│ "}
</Text>
<Text color="#928374">
{body9}
</Text>
<Text>
{" │"}
</Text>
</Box>
<Box flexDirection="row">
<Text>
{"│ "}
</Text>
<Button plain hotkey={`${i}`} label={`${label}`} />
<Text bold>
{" ! "}
</Text>
<Text>
{body10}
</Text>
<Text>
{" │"}
</Text>
</Box>
<Box flexDirection="row">
<Text>
{"│ "}
</Text>
<Text color="#928374">
{body11}
</Text>
<Text>
{" │"}
</Text>
</Box>
<Box flexDirection="row">
<Text>
{"│ "}
</Text>
<Button plain hotkey={`${i}`} label={`${label}`} />
<Text bold>
{" ! "}
</Text>
<Text>
{body12}
</Text>
<Text>
{" │"}
</Text>
</Box>
<Text>
╰────────╯
</Text>
</Box>
<Box flexDirection="column" marginTop={1}>
<Text>
<Text>
╭─
</Text>
<Text bold>
{title3}
</Text>
<Text>
────────╮
</Text>
</Text>
<Box flexDirection="row">
<Text>
{"│ "}
</Text>
<Text color="#928374">
{body13}
</Text>
<Text>
{" │"}
</Text>
</Box>
<Box flexDirection="row">
<Text>
{"│ "}
</Text>
<Button plain hotkey={`${i}`} label={`${label}`} />
<Text bold>
{" ! "}
</Text>
<Text>
{body14}
</Text>
<Text>
{" │"}
</Text>
</Box>
<Box flexDirection="row">
<Text>
{"│ "}
</Text>
<Text color="#928374">
{body15}
</Text>
<Text>
{" │"}
</Text>
</Box>
<Box flexDirection="row">
<Text>
{"│ "}
</Text>
<Button plain hotkey={`${i}`} label={`${label}`} />
<Text bold>
{" ! "}
</Text>
<Text>
{body16}
</Text>
<Text>
{" │"}
</Text>
</Box>
<Box flexDirection="row">
<Text>
{"│ "}
</Text>
<Text color="#928374">
{body17}
</Text>
<Text>
{" │"}
</Text>
</Box>
<Box flexDirection="row">
<Text>
{"│ "}
</Text>
<Button plain hotkey={`${i}`} label={`${label}`} />
<Text bold>
{" ! "}
</Text>
<Text>
{body18}
</Text>
<Text>
{" │"}
</Text>
</Box>
<Text>
╰────────╯
</Text>
</Box>
<Box flexDirection="column" marginTop={1}>
<Text>
<Text color="#928374">
{"進度 "}
</Text>
<Text color="#b8bb26">
━━━━━━━━
</Text>
<Text color="#504945">
━━━━━━━━
</Text>
<Text color="#b8bb26">
{` ${done}/${length}`}
</Text>
</Text>
<Box flexDirection="row">
<Text>
{keys}
<Text color="#504945">
{" │ "}
</Text>
</Text>
<Button plain hotkey="y" label="取消複製" />
<Text>
<Text color="#504945">
{" │ "}
</Text>
</Text>
<Button plain hotkey="q" label="關閉" />
</Box>
</Box>
<Button variant="primary" hotkey="r" label={`回報 ${length}/${length} 完成`} />
</Box>
)
})
on('session.start', async ($, e, next) => {
const length = '…'
const i = '…'
await $.ui.toast(`your-turn:${length} 條要你親手跑的指令,終端機太窄沒畫出來,打 /your-turn 打開`)
await $.ui.toast(`your-turn:已複製第 ${i}1 條`)
return next(e)
})
}
The mod's own code
Shown under the mod's licence (MIT); its text is below. Keep the notice if you copy these lines.
your-turn/hooks/register.tsx lines 88–210 · Pane
on('ui.render', { component: 'Pane', requestId: PANE }, async ($, e) => {
const { Box, Button, Text } = $.ui.resolve(e)
const steps = await read($, stepsAtom)
const isYanking = await read($, yankAtom)
// 和 away-receipt 一樣按 q 關;引擎內建的 ctrl+x x 要按兩個鍵。清單空的時候也要有,不然 q 沒作用
const close = <Button key="close" plain hotkey="q" label="關閉" onPress={() => $.ui.close({ id: PANE })} />
// 標題是一般文字,不用色塊
const header = (
<Text>
<Text bold>your-turn</Text>
<Text color={GRAY}>{` ${steps.length === 0 ? '沒有要你跑的指令' : `${steps.length} 條指令待你親手跑`}`}</Text>
</Text>
)
if (steps.length === 0) {
return (
<Box flexDirection="column">
{header}
<Box marginTop={1}>{close}</Box>
</Box>
)
}
const width = e.props.bodyColumns
const room = Math.max(10, width - ROW_FIXED)
const done = steps.filter(s => s.isDone).length
const isAllDone = done === steps.length
// 按鈕只放編號與 ○/✔(按鈕文字不能加刪除線、也不能上色);$/!、指令另用 Text 畫,做完的指令加刪除線。
// 右框線前補空白,讓每列剛好 pane 寬
const row = (s: Step, i: number, color: string, frame: string) => {
const isBang = s.cmd.startsWith('!')
const body = clip(isBang ? s.cmd.slice(1).trimStart() : s.cmd, room)
const mark = s.isDone ? '✔' : '○'
const label = i < MAX_KEYS ? mark : `${i + 1}: ${mark}`
const keyCols = i < MAX_KEYS ? 3 : 0
const pad = Math.max(0, width - 7 - keyCols - cols(label) - cols(body))
const press = (p: UiPressArgument) => (isYanking ? yank($, s.cmd, i, p) : toggle($, i))
return (
<Box key={`row-${i + 1}`} flexDirection="row">
<Text color={frame}>{'│ '}</Text>
{i < MAX_KEYS
? <Button key={`step-${i + 1}`} plain hotkey={String(i + 1)} label={label} dimColor={s.isDone} onPress={press} />
: <Button key={`step-${i + 1}`} plain label={label} dimColor={s.isDone} onPress={press} />}
<Text color={color} bold dimColor={s.isDone}>{isBang ? ' ! ' : ' $ '}</Text>
<Text dimColor={s.isDone} strikethrough={s.isDone}>{body}</Text>
<Text color={frame}>{`${' '.repeat(pad)} │`}</Text>
</Box>
)
}
// 說明行:回覆裡這段指令的前一句,淡灰色、縮排 2 欄,太長截斷
const noteLine = (note: string, i: number, frame: string) => {
const body = clip(note, Math.max(10, width - NOTE_FIXED))
return (
<Box key={`note-${i + 1}`} flexDirection="row">
<Text color={frame}>{'│ '}</Text>
<Text color={GRAY}>{body}</Text>
<Text color={frame}>{`${' '.repeat(Math.max(0, width - NOTE_FIXED - cols(body)))} │`}</Text>
</Box>
)
}
// 照清單順序切框:連續在同一處跑的指令放同一框,換地方跑就開新框,所以同一組可能出現兩個框。
// 每框上方空一行,標題嵌在上框線;框裡還有沒做完的指令時框線用該組顏色
const runs: { g: (typeof GROUPS)[number]; members: { s: Step; i: number }[] }[] = []
steps.forEach((s, i) => {
const g = GROUPS.find(x => x.has(s.cmd)) ?? GROUPS[0]
const last = runs.at(-1)
if (last?.g === g) last.members.push({ s, i })
else runs.push({ g, members: [{ s, i }] })
})
const groups = runs.map(({ g, members }, n) => {
const frame = members.some(m => !m.s.isDone) ? g.color : DARK_GRAY
const title = ` ${g.icon} ${g.title} `
return (
<Box key={`box-${n}`} flexDirection="column" marginTop={1}>
<Text>
<Text color={frame}>{'╭─'}</Text>
<Text color={g.color} bold>{title}</Text>
<Text color={frame}>{`${'─'.repeat(Math.max(0, width - 3 - cols(title)))}╮`}</Text>
</Text>
{members.flatMap(m => [...(m.s.note ? [noteLine(m.s.note, m.i, frame)] : []), row(m.s, m.i, g.color, frame)])}
<Text color={frame}>{`╰${'─'.repeat(Math.max(0, width - 2))}╯`}</Text>
</Box>
)
})
// 進度條跟著 pane 寬度縮,最長 16 格
const track = Math.max(4, Math.min(TRACK_MAX, width - FOOT_FIXED))
const filled = Math.round((done / steps.length) * track)
// lazygit 式按鍵列:按鍵塗綠、說明用預設字色、項目之間用深灰 │ 隔開
const key = (s: string) => <Text color={GREEN} bold>{s}</Text>
const sep = <Text color={DARK_GRAY}>{' │ '}</Text>
const range = `1–${Math.min(MAX_KEYS, steps.length)}`
const keys = isYanking
? [key(range), ' 按編號複製那條指令']
: isAllDone
? [key('r'), ' 回報:告訴 Claude 全部完成']
: e.props.isFocused
? [key(range), ' 勾選', sep, key('再按一次'), ' 取消']
: [key('ctrl+x tab'), ' 切過來', sep, key(range), ' 勾選']
// 再按一次 y 取消複製模式
const yankButton = <Button key="yank" plain hotkey="y" label={isYanking ? '取消複製' : '複製'} onPress={() => update($, yankAtom, v => !v)} />
return (
<Box flexDirection="column">
{header}
{groups}
<Box flexDirection="column" marginTop={1}>
<Text>
<Text color={GRAY}>進度 </Text>
<Text color={GREEN}>{TRACK.repeat(filled)}</Text>
<Text color={DARK_GRAY}>{TRACK.repeat(track - filled)}</Text>
<Text color={isAllDone ? GREEN : GRAY}>{` ${done}/${steps.length}`}</Text>
</Text>
{/* 複製、關閉鈕接在按鍵列尾:引擎畫成「y: 複製」「q: 關閉」 */}
<Box flexDirection="row">
<Text>{keys}{sep}</Text>
{yankButton}
<Text>{sep}</Text>
{close}
</Box>
</Box>
{isAllDone && (
<Button key="report" variant="primary" hotkey="r" label={`回報 ${steps.length}/${steps.length} 完成`} onPress={() => report($, steps.length)} />
)}
</Box>
)
})Licence text (MIT)
MIT License Copyright (c) 2026 Mango Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
What its code calls
drives Claude
The design, read from code
Drawn from the mod's source at the commit read, not from a run: a list is drawn three times, a condition takes its first branch that draws in the desktop app, and a value only the run time knows is shown as a made-up sample (dotted underline) or left out. Colours and type are this site's.
What its code shows
Read from the source at commit dc48c1c6691c on 2026-10-06. The first group decides whether a mod is listed; the rest is for you to weigh. A later commit is not read until the next crawl.
| Decides the listing: code you can check | |
|---|---|
| Entry read | Every module hooks/hooks.json names was read.your-turn/hooks/register.tsx |
| Parses | Every file parses as TypeScript or JavaScript.1 files parsed |
| All its code is in the mod | Every import is a file of the mod or the engine's own module; no packages, no require.all its code is in the mod |
| Readable | No minified lines, no eval or new Function, no import of a computed path, no encoded blobs.no minified code, no eval, no encoded blobs |
| Calls in the open | Network and programs are reached as $.http.fetch and $.process.run in place, never passed around.every call outside goes through $ in the open |
| For you to weigh before installing | |
| Where it draws | The terminal, the desktop app, both, or nothing (hooks only: a guard or a prompt rewriter), as its code says. Shown, never a reason to leave a mod out.draws in the terminal and the desktop app, the same in both |
| Install line | Whether its repository's own .claude-plugin/marketplace.json lists it, so it installs from that marketplace with the lines on its page.listed in its repository's .claude-plugin/marketplace.json: installs from there |
| Programs on Windows | Whether every program it starts through $.process exists on Windows (tail, date, open, osascript, /usr/… do not).runs no program a Windows PC lacks |
| Network | Whether every fetch names its https host in the code.no network |
| Programs | Whether every program it starts is named in the code and is not a shell, an interpreter or a network tool.starts no programs |
| Reads and sends | Whether it both reads files or environment variables and reaches the network.reaches no network |
| Keys in the source | Whether the source holds what looks like an API key or a private key.no keys in the source |
| Licence | An open licence (MIT, Apache-2.0, BSD, ISC, Unlicense, 0BSD, CC0) with its text lets modscode show its code; otherwise the code is linked.MIT |
This is a reading of the code text, not a security review: it does not run the mod, and it cannot see what a program the mod starts does. The check before installing is yours. How mods are chosen
Install it
Check it yourself before you install it. Mods run unsandboxed, with your permissions, and modscode does not vouch for what this code does. Read the code below (or run claude plugin validate . in its folder), weigh what it reaches, and install the commit you read.
Its repository is its marketplace. Add that marketplace (in the terminal with these commands, or in the desktop app's plugin settings) and install the mod from it:
/plugin marketplace add mangow314/mango-mods/plugin install your-turn@mango-modsThis installs the marketplace's latest commit, which may not be the one read here (dc48c1c6691c). Compare them before you install.
Ask Claude about it
With the modscode connector added, Claude can read this design, what its code reaches and its code, and build on them. Ask it like this:
Read the modscode design "mangow314-your-turn" with its code and make me a pane like itSearch them from Claude: the MCP connector
Similar designs
-
Ask Claude…Fix login▸★ build ok▸★ build ok▸★ build ok+3 moretasks 3 pending · Glob claimed · 3 doneConsensus42%
-
Ask Claude…2h 10m · █████░░░✓ build ✓ build ✓ buildJavaKotlin3 Python■ ok 3 ■ ok 3 ■ ok 3 Razor proven 3 Razor proven 3 Razor proven 3Phases ──────── 3/3build Pythonbuild Pythonbuild Python… 3 more phasesLua ──────── 3/Kotlin■ the whole upgrade Ruby■ build build Ruby■ build build Ruby■ build build Ruby … 3 moreNext ──────── PythonRuby (by hand)Podsclick a button, or ctrl+x tab then Tab, EnterAttention ──────── 3! Scala ! Scala ! Scala … 3 moreSession ──────── okJava
-
Ask Claude…moai-boardmoai-boardPickedx closebuild 1build 2build 3r refreshQueue not read yetokPick
-
Open a file first: /crit-tui file <path>Reopen this one in the crit browser view.Ask Claude…
-
Ask Claude…./rows.tsx●●●●●×./rows.tsxnothing loaded yet● Fix login● Fix login● Fix login● Fix login● Fix login● Fix login● Fix login● Fix login● Fix login./rows.tsxWorkspaceWorkspaceWorkspaceselected: build● open in Databricks
-
Ask Claude…build 3 app●●●◉●●okno Library app here yet; Library adds one●./rows.tsx./rows.tsxselected: Nerd