modscode JA

modscode / Gallery / task-eta

task-eta

长任务进度行:一轮跑满 3 分钟时让模型估一次剩余步骤,之后按工具调用推进状态栏里的步骤、进度条和剩余时间

Code you can checkTerminal + desktopPaneBandBoxButtonText

What it does

  • Draws a band above the prompt, a pane
  • Adds /steps
  • Watches tool calls and can refuse them
  • Hooks session.end, session.start, turn.complete, turn.start

Good points

  • No network calls
  • Starts no processes
  • Written in TypeScript
  • Handles errors

Code to start from

Two kinds: a starter modscode writes from the design above, and the lines of the mod's own code that draw it.

Starter (register.tsx)

register.tsx
import type { Register } from 'claude-code'

// Drawn like task-eta by Bearisbug (pane, band), as modscode read it from the mod's code:
// https://modscode.com/gallery/bearisbug-task-eta/
// Written by modscode from that reading, not copied from the mod: use it as you like.
// Each value below stands for one the mod works out at run time; put in your own.
export const register: Register = on => {
  // the band above the prompt; what else goes there is drawn under it
  on('ui.render', { component: 'AbovePrompt' }, async ($, e, next) => {
    const { Box, Text } = $.ui.resolve(e)
    const text = '…'
    const text2 = '…'
    const text3 = '…'
    return (
      <Box flexDirection="column">
        <Box flexDirection="row" gap={1}>
          <Box flexShrink={0}>
            <Text color="autoAccept" bold>
              ▍进度
            </Text>
          </Box>
          <Text wrap="truncate-end">
            {text}
          </Text>
          <Text wrap="truncate-end">
            {text2}
          </Text>
          <Text wrap="truncate-end">
            {text3}
          </Text>
        </Box>
        {await next(e)}
      </Box>
    )
  })

  // the pane: open it with $.ui.open({ id: 'my-pane', title: "任务步骤" })
  on('ui.render', { component: 'Pane', requestId: 'my-pane' }, async ($, e) => {
    const { Box, Text, Button } = $.ui.resolve(e)
    const taskTitle = '…'
    const parts = '…'
    const activity = '…'
    return (
      <Box flexDirection="column" paddingX={1}>
        <Box flexDirection="row" gap={1}>
          <Text color="autoAccept" bold>
            任务
          </Text>
          <Text>
            {taskTitle}
          </Text>
        </Box>
        <Box flexDirection="row" gap={1} marginBottom={1}>
          <Text dimColor>
            {parts}
          </Text>
          <Text color="autoAccept">
            ▰▰▰▰▰▰▰▰▱▱▱▱▱▱▱▱
          </Text>
        </Box>
        <Box flexDirection="column">
          <Text dimColor>
            正在估算步骤,几秒后出现清单…
          </Text>
          <Text color="ide">
            {"└ "}
            {activity}
          </Text>
        </Box>
        <Box flexDirection="row" gap={2} marginTop={1}>
          <Button plain hotkey="c">
            让 Claude 重新核对
          </Button>
          <Button plain hotkey="d">
            整份标为完成
          </Button>
        </Box>
        <Box flexDirection="column" marginTop={1}>
          <Text dimColor>
            ✓ 只在下一步真正开始、或 Claude 核对确认后才打勾;中断后发下一条消息,接着这份清单,不重新估算。
          </Text>
          <Text dimColor>
            {"Esc 或 "}
            ctrl+x p
            {" 关闭(面板开着时 Esc 只关面板,不会中断 Claude)"}
          </Text>
        </Box>
      </Box>
    )
  })
}

The mod's own code

Shown under the mod's licence (MIT); its text is below. Keep the notice if you copy these lines.

task-eta/hooks/register.tsx lines 611–679 · Band
  on('ui.render', { component: 'AbovePrompt' }, async ($, e, next) => {
    const below = await next(e)
    const now = Date.now()
    const t = task
    if (!t || e.props.hasSurvey) return below
    const isRunning = t.ending === 'running'
    if (isRunning ? !isRunningVisible(t, now) : now >= bandUntil) return below
    const { Box, Text } = $.ui.resolve(e)
    const at = active(t)
    const cur = t.items[at]
    const doneCount = finishedCount(t)

    const hint: Part = { text: `${TOGGLE_KEY} 看步骤`, rank: 2, isDim: true }
    let parts: Part[]
    if (!isRunning) {
      const total = t.items.length
      const skipped = t.items.filter(i => i.status === 'skipped').length
      const word: Part = { text: endingLabel(t.ending, t.isFinalChecking), rank: 0 }
      parts = t.isFinalChecking
        ? [word, { text: 'Claude 在确认哪些步骤真的做完了', rank: 3, isDim: true }, { text: `已打勾 ${doneCount}/${total}`, rank: 1, isDim: true }, hint]
        : t.ending === 'done'
          ? [word, { text: `用时 ${spent(elapsed(t, now))}`, rank: 1, isDim: true }, ...(skipped > 0 ? [{ text: `${skipped} 步后来不需要了`, rank: 3, isDim: true }] : []), hint]
          : t.ending === 'unchecked'
            ? [word, { text: `完成 ${doneCount}/${total} 步(未经 Claude 确认)`, rank: 1, isDim: true }, { text: '面板里按 c 重试', rank: 3, isDim: true }, hint]
            : [word, { text: `完成 ${doneCount}/${total} 步`, rank: 1, isDim: true }, { text: '下一条消息接着这份清单', rank: 4, isDim: true }, hint]
    } else if (!cur) {
      parts = [
        { text: t.isBusy ? '正在估算步骤…' : t.isWaitingFirstReply ? '等 Claude 第一次回复后估算' : '还没有步骤估算', rank: 0 },
        { text: `已 ${spent(elapsed(t, now))}`, rank: 3, isDim: true },
        { text: `${t.tools} 次工具调用`, rank: 4, isDim: true },
        { ...hint, rank: 1 },
      ]
    } else {
      const remain = left(t, now)
      const nextItem = t.items[at + 1]
      parts = [
        { text: `${at + 1}/${t.items.length} ${cur.title}`, rank: 0 },
        { text: bar(doneCount, t.items.length), rank: 2, color: 'autoAccept' },
        { text: `已 ${spent(elapsed(t, now))}`, rank: 4, isDim: true },
        { text: remain > 0 ? `约剩 ${duration(remain)}` : '已超出预估', rank: 1, isDim: true },
        ...(nextItem ? [{ text: `下一步 ${nextItem.title}`, rank: 5, isDim: true }] : []),
        { ...hint, rank: 3 },
      ]
    }
    const runs: Part[] = []
    // 右端 4 格是 Claude Code 自己画的折叠按钮「 [-]」,bodyColumns 里含着它
    for (const p of fitBand(parts, e.props.bodyColumns - 4)) {
      const last = runs.at(-1)
      if (last?.isDim && p.isDim) last.text += ` · ${p.text}`
      else runs.push({ ...p })
    }
    return (
      <Box flexDirection="column">
        <Box flexDirection="row" gap={1}>
          <Box flexShrink={0}>
            <Text color="autoAccept" bold>
              {BAND_LABEL}
            </Text>
          </Box>
          {runs.map((r, i) => (
            <Text key={String(i)} color={r.color} dimColor={r.isDim} wrap="truncate-end">
              {r.text}
            </Text>
          ))}
        </Box>
        {below}
      </Box>
    )
  })
task-eta/hooks/register.tsx lines 681–795 · Pane
  on('ui.render', { component: 'Pane', requestId: PANE }, async ($, e) => {
    const { Box, Text, Button } = $.ui.resolve(e)
    const now = Date.now()
    const t = task
    const width = Math.max(40, e.props.bodyColumns - 2)
    const titleWidth = Math.min(30, Math.max(14, Math.floor(width * 0.4)))

    const footer = (
      <Box flexDirection="column" marginTop={1}>
        <Text dimColor>✓ 只在下一步真正开始、或 Claude 核对确认后才打勾;中断后发下一条消息,接着这份清单,不重新估算。</Text>
        <Text dimColor>Esc 或 {TOGGLE_KEY} 关闭(面板开着时 Esc 只关面板,不会中断 Claude)</Text>
      </Box>
    )
    if (!t) {
      return (
        <Box flexDirection="column" paddingX={1}>
          <Text>还没有任务记录。Claude 开始干活后,这里会显示步骤。</Text>
          {footer}
        </Box>
      )
    }

    const at = active(t)
    const doneCount = finishedCount(t)
    const parts = [`已 ${spent(elapsed(t, now))}`]
    if (t.ending === 'running') {
      if (at >= 0) parts.push(left(t, now) > 0 ? `约剩 ${duration(left(t, now))}` : '已超出预估', `第 ${at + 1}/${t.items.length} 步`)
      else parts.push(`${t.tools} 次工具调用`)
      if (t.isBusy && t.items.length > 0) parts.push('Claude 正在核对进度…')
    } else {
      parts.unshift(endingLabel(t.ending, t.isFinalChecking))
      parts.push(`完成 ${doneCount}/${t.items.length} 步`)
      if (t.ending === 'unchecked') parts.push('没能让 Claude 确认,按 c 重试')
      else if (t.ending !== 'done' && !t.isFinalChecking) parts.push('下一条消息接着这份清单')
    }

    const stepRow = (it: Item, n: number) => {
      const isNow = it.status === 'active'
      const isLive = isNow && t.ending === 'running'
      const mark = it.status === 'done' ? '✓' : it.status === 'skipped' ? '–' : isNow ? '▶' : '○'
      const markColor = it.status === 'done' ? 'success' : isNow ? 'autoAccept' : undefined
      const inStep = (t.ending === 'running' ? now : t.pausedAt) - it.startedAt
      const calls = it.tools > 0 ? ` · ${it.tools} 次调用` : ''
      let note
      if (it.status === 'done') note = it.isUntimed ? '已完成(核对确认)' : `${spent(it.endedAt - it.startedAt)}(预计 ${duration(it.minutes)})${calls}`
      else if (it.status === 'skipped') note = '后来不需要了(核对确认)'
      else if (isNow) note = `${spent(inStep)} / 预计 ${duration(it.minutes)}${calls}${isLive ? '' : ' · 已暂停'}`
      else note = `预计 ${duration(it.minutes)}`
      return (
        <Box flexDirection="column" key={`step-${n}`}>
          <Box flexDirection="row" gap={1}>
            <Text color={markColor} bold={isNow}>
              {mark}
            </Text>
            <Box width={2}>
              <Text dimColor={!isNow}>{String(n + 1)}</Text>
            </Box>
            <Box width={titleWidth}>
              <Text bold={isNow} dimColor={it.status === 'done' || it.status === 'skipped'} strikethrough={it.status === 'skipped'}>
                {it.title}
              </Text>
            </Box>
            {isNow && <Text color="autoAccept">{bar(inStep, it.minutes * MINUTE, 5)}</Text>}
            <Text dimColor>{note}</Text>
          </Box>
          {isLive && t.activity !== '' && (
            <Box paddingLeft={5}>
              <Text color="ide">└ {t.activity}</Text>
            </Box>
          )}
        </Box>
      )
    }

    return (
      <Box flexDirection="column" paddingX={1}>
        <Box flexDirection="row" gap={1}>
          <Text color="autoAccept" bold>
            任务
          </Text>
          <Text>{taskTitle(t.text)}</Text>
        </Box>
        <Box flexDirection="row" gap={1} marginBottom={1}>
          <Text dimColor>{parts.join(' · ')}</Text>
          {t.items.length > 0 && <Text color="autoAccept">{bar(doneCount, t.items.length)}</Text>}
        </Box>
        {t.items.map(stepRow)}
        {t.items.length === 0 && (
          <Box flexDirection="column">
            <Text dimColor>
              {t.isBusy
                ? '正在估算步骤,几秒后出现清单…'
                : t.isWaitingFirstReply
                  ? '等 Claude 第一次回复后估算'
                  : '还没有步骤估算(跑满 3 分钟或按 ctrl+x p 时估算)'}
            </Text>
            {t.ending === 'running' && t.activity !== '' && <Text color="ide">└ {t.activity}</Text>}
          </Box>
        )}
        {t.items.length > 0 && (
          <Box flexDirection="row" gap={2} marginTop={1}>
            <Button key="recheck" plain hotkey="c" onPress={() => void recheck($, t)}>
              让 Claude 重新核对
            </Button>
            {t.ending !== 'running' && t.ending !== 'done' && (
              <Button key="finish" plain hotkey="d" onPress={() => finishByHand($, t)}>
                整份标为完成
              </Button>
            )}
          </Box>
        )}
        {footer}
      </Box>
    )
  })
Licence text (MIT)
MIT License

Copyright (c) 2026 Bearisbug

Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.

What its code calls

drives Claudetool calls

The design, read from code

Drawn from the mod's source at the commit read, not from a run: a list is drawn three times, a condition takes its first branch that draws in the desktop app, and a value only the run time knows is shown as a made-up sample (dotted underline) or left out. Colours and type are this site's.

What its code shows

Read from the source at commit cd2be78744da on 2026-10-06. The first group decides whether a mod is listed; the rest is for you to weigh. A later commit is not read until the next crawl.

Decides the listing: code you can check
Entry readEvery module hooks/hooks.json names was read.task-eta/hooks/register.tsx
ParsesEvery file parses as TypeScript or JavaScript.1 files parsed
All its code is in the modEvery import is a file of the mod or the engine's own module; no packages, no require.all its code is in the mod
ReadableNo minified lines, no eval or new Function, no import of a computed path, no encoded blobs.no minified code, no eval, no encoded blobs
Calls in the openNetwork and programs are reached as $.http.fetch and $.process.run in place, never passed around.every call outside goes through $ in the open
For you to weigh before installing
Where it drawsThe terminal, the desktop app, both, or nothing (hooks only: a guard or a prompt rewriter), as its code says. Shown, never a reason to leave a mod out.draws in the terminal and the desktop app, the same in both
Install lineWhether its repository's own .claude-plugin/marketplace.json lists it, so it installs from that marketplace with the lines on its page.listed in its repository's .claude-plugin/marketplace.json: installs from there
Programs on WindowsWhether every program it starts through $.process exists on Windows (tail, date, open, osascript, /usr/… do not).runs no program a Windows PC lacks
NetworkWhether every fetch names its https host in the code.no network
ProgramsWhether every program it starts is named in the code and is not a shell, an interpreter or a network tool.starts no programs
Reads and sendsWhether it both reads files or environment variables and reaches the network.reaches no network
Keys in the sourceWhether the source holds what looks like an API key or a private key.no keys in the source
LicenceAn open licence (MIT, Apache-2.0, BSD, ISC, Unlicense, 0BSD, CC0) with its text lets modscode show its code; otherwise the code is linked.MIT

This is a reading of the code text, not a security review: it does not run the mod, and it cannot see what a program the mod starts does. The check before installing is yours. How mods are chosen

Install it

Check it yourself before you install it. Mods run unsandboxed, with your permissions, and modscode does not vouch for what this code does. Read the code below (or run claude plugin validate . in its folder), weigh what it reaches, and install the commit you read.

Its repository is its marketplace. Add that marketplace (in the terminal with these commands, or in the desktop app's plugin settings) and install the mod from it:

/plugin marketplace add Bearisbug/cc-mods
/plugin install task-eta@cc-mods

This installs the marketplace's latest commit, which may not be the one read here (cd2be78744da). Compare them before you install.

Ask Claude about it

With the modscode connector added, Claude can read this design, what its code reaches and its code, and build on them. Ask it like this:

Read the modscode design "bearisbug-task-eta" with its code and make me a pane like it

Search them from Claude: the MCP connector

Similar designs