next-steps by mako-code: Claude Code mod code

What it does

Draws a band above the prompt
Hooks prompt.submit, session.end, turn.complete, turn.start

Good points

No network calls
Starts no processes
Small: 346 lines
Written in TypeScript

Code to start from

A starter ModsCode writes from the drawing it read, and the mod's own lines that draw, where there are any.

Starter (register.tsx)

import type { Register } from 'claude-code'

// Drawn like next-steps by mako-code (band), as ModsCode read it from the mod's code:
// https://modscode.com/claude-mods/mods/mako-code-next-steps/
// Written by ModsCode from that reading, not copied from the mod: use it as you like.
// Each value below stands for one the mod works out at run time; put in your own.
export const register: Register = on => {
  // the band above the prompt; what else goes there is drawn under it
  on('ui.render', { component: 'AbovePrompt' }, async ($, e, next) => {
    const { Box, Text, Button } = $.ui.resolve(e)
    const n = '…'
    const title = '…'
    const clipText = '…'
    const title2 = '…'
    const clipText2 = '…'
    const title3 = '…'
    const clipText3 = '…'
    return (
      <Box flexDirection="column">
        <Box flexDirection="row" columnGap={1}>
          <Text color="cyan" bold>
            •
          </Text>
          <Button hotkey={`${n}`} label={`${n}`} dimColor />
          <Box flexShrink={1} flexGrow={1}>
            <Text wrap="wrap">
              <Text bold>
                {title}
              </Text>
              <Text dimColor>
                {" · "}
              </Text>
              <Text>
                {clipText}
              </Text>
            </Text>
          </Box>
        </Box>
        <Box flexDirection="row" columnGap={1}>
          <Text color="cyan" bold>
            •
          </Text>
          <Button hotkey={`${n}`} label={`${n}`} dimColor />
          <Box flexShrink={1} flexGrow={1}>
            <Text wrap="wrap">
              <Text bold>
                {title2}
              </Text>
              <Text dimColor>
                {" · "}
              </Text>
              <Text>
                {clipText2}
              </Text>
            </Text>
          </Box>
        </Box>
        <Box flexDirection="row" columnGap={1}>
          <Text color="cyan" bold>
            •
          </Text>
          <Button hotkey={`${n}`} label={`${n}`} dimColor />
          <Box flexShrink={1} flexGrow={1}>
            <Text wrap="wrap">
              <Text bold>
                {title3}
              </Text>
              <Text dimColor>
                {" · "}
              </Text>
              <Text>
                {clipText3}
              </Text>
            </Text>
          </Box>
        </Box>
        {await next(e)}
      </Box>
    )
  })
}

The mod's own code

Shown under the mod's licence (MIT); its text is below. Keep the notice if you copy these lines.

mods/prompting/next-steps/hooks/register.tsx lines 100–137 · Band

mods/prompting/next-steps/hooks/register.tsx:100

  on('ui.render', { component: 'AbovePrompt' }, async ($, e, next) => {
    if (e.props.hasSurvey || e.props.isWorking || e.props.view.agentId !== undefined) return next(e)
    const current = await read($, steps)
    if (current === null || current.items.length === 0) return next(e)
    const { Box, Text, Button } = $.ui.resolve(e)
    const below = await next(e)
    const columns = e.props.bodyColumns
    // One row per suggestion, in the band's vocabulary: the tone glyph, a numbered button
    // (a Button label is one line, so it carries only the number) and the whole suggestion
    // wrapping beside it; only an extreme one is cut, past SUGGESTION_LINES lines.
    return (
      <Box flexDirection="column">
        {current.items.map((item, index) => {
          const n = String(index + 1)
          const title = index === 0 ? 'Next' : ''
          // glyph and gap, `[ n ]` and its gap, the title and its ` · `
          const firstLine = Math.max(10, columns - 2 - (n.length + 5) - (title === '' ? 0 : title.length + 3))
          const room = firstLine + (SUGGESTION_LINES - 1) * Math.max(10, columns - 2)
          return (
            <Box key={`next-steps-row-${n}`} flexDirection="row" columnGap={1}>
              <Text color={TONES.info.color} bold>
                {TONES.info.glyph}
              </Text>
              <Button key={`next-steps-${n}`} hotkey={n} label={n} dimColor onPress={() => void pick($, index)} />
              <Box flexShrink={1} flexGrow={1}>
                <Text wrap="wrap">
                  {title !== '' && <Text bold>{title}</Text>}
                  {title !== '' && <Text dimColor>{' · '}</Text>}
                  <Text>{clipText(item, room)}</Text>
                </Text>
              </Box>
            </Box>
          )
        })}
        {below}
      </Box>
    )
  })

Licence text (MIT)

MIT License

Copyright (c) 2026 mako-code

Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.

How to build this: Band above the prompt, Rewrite the prompt

What its code calls

drives Claude

What its code shows

Read from the source at commit ec6ea2383749 on 2026-10-11. The first group decides whether a mod is listed; the rest is for you to weigh. A later commit is not read until the next crawl.

Decides the listing: code you can check
Entry read	Every module hooks/hooks.json names was read.mods/prompting/next-steps/hooks/register.tsx
Parses	Every file parses as TypeScript or JavaScript.3 files parsed
All its code is in the mod	Every import is a file of the mod or the engine's own module; no packages, no require.all its code is in the mod
Readable	No minified lines, no eval or new Function, no import of a computed path, no encoded blobs.no minified code, no eval, no encoded blobs
Calls in the open	Network and programs are reached as $.http.fetch and $.process.run in place, never passed around.every call outside goes through $ in the open
For you to weigh before installing
Where it draws	The terminal, the desktop app, both, or nothing (hooks only: a guard or a prompt rewriter), as its code says. Shown, never a reason to leave a mod out.draws in the terminal and the desktop app, the same in both
Install line	Whether its repository's own .claude-plugin/marketplace.json lists it, so it installs from that marketplace with the lines on its page.listed in its repository's .claude-plugin/marketplace.json: installs from there
Programs on Windows	Whether every program it starts through $.process exists on Windows (tail, date, open, osascript, /usr/… do not).runs no program a Windows PC lacks
Network	Whether every fetch names its https host in the code.no network
Programs	Whether every program it starts is named in the code and is not a shell, an interpreter or a network tool.starts no programs
Reads and sends	Whether it both reads something of yours (files, environment variables, the transcript, settings) and reaches outside (the network, an MCP server, another session, telemetry).reaches no network
Keys in the source	Whether the source holds what looks like an API key or a private key.no keys in the source
Licence	An open licence (MIT, Apache-2.0, BSD, ISC, Unlicense, 0BSD, CC0) with its text lets ModsCode show its code; otherwise the code is linked.MIT

This is a reading of the code text, not a security review: it does not run the mod, and it cannot see what a program the mod starts does. The check before installing is yours. How mods are chosen

Install it

Check it yourself before you install it. Mods run unsandboxed, with your permissions, and ModsCode does not vouch for what this code does. Read its code (or run claude plugin validate . in its folder), weigh what it reaches, and install the commit you read.

From its marketplace

Its repository is its marketplace. Add that marketplace (in the terminal with these commands, or in the desktop app's plugin settings) and install the mod from it:

/plugin marketplace add mako-code/gobworks

/plugin install next-steps@gobworks

/reload-plugins

This installs the marketplace's latest commit, which may not be the one read here (ec6ea2383749). Compare them before you install. /reload-plugins loads it into a session that is already open.

Try the commit ModsCode read

No marketplace needed. In a terminal, clone the repository, check out the commit read, validate the mod, and load it for one session:

git clone https://github.com/mako-code/gobworks

git -C gobworks checkout ec6ea23837494b5b13124caa186450be8b42bf2d

claude plugin validate gobworks/mods/prompting/next-steps

claude --plugin-dir gobworks/mods/prompting/next-steps

The validate line lists the events the mod hooks and what it asks Claude Code to do, without running it. The last line loads the mod for this session only and writes nothing to your settings. If the author has rewritten history, the commit may no longer exist.

Ask Claude about it

With the ModsCode connector added, Claude can read this mod's code and what it reaches, and build on them. Ask it like this:

Read the ModsCode mod "mako-code-next-steps" with its code and make me one like it

Search them from Claude: the MCP connector

Similar mods

More from this repository

See all 117 mods in this repository

Badge for your README

If this is your mod, paste this into your README. It links to this page.

README.md

[![ModsCode](https://modscode.com/badge/mako-code-next-steps.svg)](https://modscode.com/claude-mods/mods/mako-code-next-steps/)