ModsCode / Claude Code Mods / Ranking / jev-triage
jev-triage
Every failed Bash/PowerShell command gets an instant Jev diagnosis (15 failure classes) and a playbook in this project's terms, as a note Claude reads.
What it does
- Draws a pane, toasts
- Adds /triage
- Watches tool calls and can refuse them
- Hooks session.start
- Calls the network
Good points
- Written in TypeScript
- Handles errors
- Writes no files
Code to start from
A starter ModsCode writes from the drawing it read, and the mod's own lines that draw, where there are any.
Starter (register.tsx)
import type { Register } from 'claude-code'
// Drawn like jev-triage by mako-code (pane, toast), as ModsCode read it from the mod's code:
// https://modscode.com/claude-mods/mods/mako-code-jev-triage/
// Written by ModsCode from that reading, not copied from the mod: use it as you like.
// Each value below stands for one the mod works out at run time; put in your own.
export const register: Register = on => {
// the pane: open it with $.ui.open({ id: 'my-pane', title: "Triage" })
on('ui.render', { component: 'Pane', requestId: 'my-pane' }, async ($, e) => {
const { Box, Text, Button } = $.ui.resolve(e)
const project = '…'
const command = '…'
const shell = '…'
const error = '…'
const note = '…'
const cls = '…'
const count = '…'
const lastCommand = '…'
const hhmmss = '…'
const cls2 = '…'
const count2 = '…'
const lastCommand2 = '…'
const hhmmss2 = '…'
const cls3 = '…'
const count3 = '…'
const lastCommand3 = '…'
const hhmmss3 = '…'
const ledgerLine = '…'
return (
<Box flexDirection="column">
<Text bold>
{"Jev triage "}
<Text dimColor>
· failed commands
</Text>
</Text>
<Text dimColor wrap="wrap">
{project}
</Text>
<Text>
{" "}
</Text>
<Box flexDirection="column">
<Text wrap="wrap">
{"Last: "}
<Text bold>
{command}
</Text>
{" → exit "}
?
{" ("}
{shell}
)
</Text>
<Text dimColor wrap="wrap">
{`not triaged: ${error}`}
</Text>
<Text wrap="wrap">
{note}
</Text>
</Box>
<Text>
{" "}
</Text>
<Text bold>
This session
</Text>
<Text dimColor>
No failures triaged.
</Text>
<Text wrap="truncate-end">
{cls}
{count}
{" "}
<Text dimColor>
{"last: "}
{lastCommand}
{" ("}
{hhmmss}
)
</Text>
</Text>
<Text wrap="truncate-end">
{cls2}
{count2}
{" "}
<Text dimColor>
{"last: "}
{lastCommand2}
{" ("}
{hhmmss2}
)
</Text>
</Text>
<Text wrap="truncate-end">
{cls3}
{count3}
{" "}
<Text dimColor>
{"last: "}
{lastCommand3}
{" ("}
{hhmmss3}
)
</Text>
</Text>
<Text>
{" "}
</Text>
<Text dimColor wrap="wrap">
{ledgerLine}
</Text>
<Box gap={1}>
<Button hotkey="r" label="Reset" />
<Button hotkey="x" role="dismiss" label="Close" />
</Box>
</Box>
)
})
on('session.start', async ($, e, next) => {
const error = '…'
await $.ui.toast(`Off: ${error}`)
return next(e)
})
}
The mod's own code
Shown under the mod's licence (MIT); its text is below. Keep the notice if you copy these lines.
mods/jev/jev-triage/hooks/register.tsx lines 207–274 · Pane
on('ui.render', { component: 'Pane', requestId: PANE }, async ($, e) => {
const { Box, Text, Button } = $.ui.resolve(e)
if (!(await keyIsSet($))) {
return (
<Box flexDirection="column">
<Text bold>Jev triage</Text>
<Text>Off: TYPESAFE_API_KEY is not set.</Text>
<Text dimColor>{KEY_HELP}</Text>
<Box marginTop={1}>
<Button key="close" hotkey="x" role="dismiss" label="Close" onPress={() => void $.ui.close({ id: PANE })} />
</Box>
</Box>
)
}
const f = await read($, factsAtom)
const c = await read($, counts)
const last = await read($, lastTriage)
const spent = await read($, ledger)
const rows = Object.entries(c).sort((a, b) => b[1].count - a[1].count || b[1].lastAt - a[1].lastAt)
const project =
f === null
? 'Project: not read yet.'
: `Project: ${f.os} · ${f.packageManager === null ? 'no package manager found' : `${f.packageManager.name} (${f.packageManager.from})`} · tests: ${f.testCommand ?? 'unknown'}`
return (
<Box flexDirection="column">
<Text bold>
Jev triage <Text dimColor>· failed commands</Text>
</Text>
<Text dimColor wrap="wrap">
{project}
</Text>
<Text> </Text>
{last === null ? (
<Text dimColor>No failed command yet.</Text>
) : (
<Box flexDirection="column">
<Text wrap="wrap">
Last: <Text bold>{last.command.replace(/\s+/g, ' ').slice(0, 200)}</Text> → exit {last.exitCode ?? '?'} ({last.shell})
</Text>
<Text dimColor wrap="wrap">
{last.error !== null
? `not triaged: ${last.error}`
: `${last.cls} ${last.confidence === null ? '' : last.confidence.toFixed(2)} · ${Math.round(last.ms)} ms${last.note === null ? ' · no playbook attached' : ''}`}
</Text>
{last.note !== null && <Text wrap="wrap">{last.note}</Text>}
</Box>
)}
<Text> </Text>
<Text bold>This session</Text>
{rows.length === 0 && <Text dimColor>No failures triaged.</Text>}
{rows.map(([cls, row]) => (
<Text key={`class-${cls}`} wrap="truncate-end">
{cls.padEnd(22)}
{String(row.count).padStart(3)} <Text dimColor>last: {row.lastCommand.replace(/\s+/g, ' ')} ({hhmmss(row.lastAt)})</Text>
</Text>
))}
<Text> </Text>
<Text dimColor wrap="wrap">
{ledgerLine(spent)}
</Text>
<Box gap={1}>
<Button key="reset" hotkey="r" label="Reset" onPress={() => quietly(resetCounts($))} />
<Button key="close" hotkey="x" role="dismiss" label="Close" onPress={() => void $.ui.close({ id: PANE })} />
</Box>
</Box>
)
})Licence text (MIT)
MIT License Copyright (c) 2026 mako-code Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
How to build this: Pane (panel), Deny a tool call
What its code calls
networkruns programsreads filesenv varstool calls
What its code shows
Read from the source at commit ec6ea2383749 on 2026-10-11. The first group decides whether a mod is listed; the rest is for you to weigh. A later commit is not read until the next crawl.
| Decides the listing: code you can check | |
|---|---|
| Entry read | Every module hooks/hooks.json names was read.mods/jev/jev-triage/hooks/register.tsx |
| Parses | Every file parses as TypeScript or JavaScript.3 files parsed |
| All its code is in the mod | Every import is a file of the mod or the engine's own module; no packages, no require.all its code is in the mod |
| Readable | No minified lines, no eval or new Function, no import of a computed path, no encoded blobs.no minified code, no eval, no encoded blobs |
| Calls in the open | Network and programs are reached as $.http.fetch and $.process.run in place, never passed around.every call outside goes through $ in the open |
| For you to weigh before installing | |
| Where it draws | The terminal, the desktop app, both, or nothing (hooks only: a guard or a prompt rewriter), as its code says. Shown, never a reason to leave a mod out.draws in the terminal and the desktop app, the same in both |
| Install line | Whether its repository's own .claude-plugin/marketplace.json lists it, so it installs from that marketplace with the lines on its page.listed in its repository's .claude-plugin/marketplace.json: installs from there |
| Programs on Windows | Whether every program it starts through $.process exists on Windows (tail, date, open, osascript, /usr/… do not).mods/jev/jev-triage/hooks/register.tsx:114 uname (not on Windows) |
| Network | Whether every fetch names its https host in the code.mods/jev/jev-triage/hooks/register.tsx:48 fetch(JEV_URL) |
| Programs | Whether every program it starts is named in the code and is not a shell, an interpreter or a network tool.uname |
| Reads and sends | Whether it both reads something of yours (files, environment variables, the transcript, settings) and reaches outside (the network, an MCP server, another session, telemetry).reads environment variables and files and reaches the network |
| Keys in the source | Whether the source holds what looks like an API key or a private key.no keys in the source |
| Licence | An open licence (MIT, Apache-2.0, BSD, ISC, Unlicense, 0BSD, CC0) with its text lets ModsCode show its code; otherwise the code is linked.MIT |
This is a reading of the code text, not a security review: it does not run the mod, and it cannot see what a program the mod starts does. The check before installing is yours. How mods are chosen
Install it
Check it yourself before you install it. Mods run unsandboxed, with your permissions, and ModsCode does not vouch for what this code does. Read its code (or run claude plugin validate . in its folder), weigh what it reaches, and install the commit you read.
From its marketplace
Its repository is its marketplace. Add that marketplace (in the terminal with these commands, or in the desktop app's plugin settings) and install the mod from it:
/plugin marketplace add mako-code/gobworks/plugin install jev-triage@gobworks/reload-pluginsThis installs the marketplace's latest commit, which may not be the one read here (ec6ea2383749). Compare them before you install. /reload-plugins loads it into a session that is already open.
Try the commit ModsCode read
No marketplace needed. In a terminal, clone the repository, check out the commit read, validate the mod, and load it for one session:
git clone https://github.com/mako-code/gobworksgit -C gobworks checkout ec6ea23837494b5b13124caa186450be8b42bf2dclaude plugin validate gobworks/mods/jev/jev-triageclaude --plugin-dir gobworks/mods/jev/jev-triageThe validate line lists the events the mod hooks and what it asks Claude Code to do, without running it. The last line loads the mod for this session only and writes nothing to your settings. If the author has rewritten history, the commit may no longer exist.
Ask Claude about it
With the ModsCode connector added, Claude can read this mod's code and what it reaches, and build on them. Ask it like this:
Read the ModsCode mod "mako-code-jev-triage" with its code and make me one like itSearch them from Claude: the MCP connector
Similar mods
- ruflo-swarmruvnet★ 74,323
- code-modernizationAnthropic★ 37,653
- moai-boardMoAI-ADK★ 1,230
- crit-tuiTomasz Tomczyk★ 1,196
- lcu-approveLCU★ 894
- ai-maestro-secrets23blocks-OS★ 817
More from this repository
- achievementsmako-code★ 1
- agent-routermako-code★ 1
- arcademako-code★ 1
- attributionmako-code★ 1
- auto-contextmako-code★ 1
- auto-continuemako-code★ 1
See all 117 mods in this repository
Badge for your README
If this is your mod, paste this into your README. It links to this page.
[](https://modscode.com/claude-mods/mods/mako-code-jev-triage/)